Back to Blog
How-to Guides 2026-11-22 Holly Bones Art & Design 0 views

Using 'About A Murder' Sticker on a Laptop or Notebook

Using 'About A Murder' Sticker on a Laptop or Notebook

Learn how to apply and care for the 'About A Murder' vinyl sticker on laptops and notebooks, with tips on placement, removal, and durability.

Why This Sticker Works on Laptops and Notebooks

The 'About A Murder' sticker is designed for everyday use on items you carry with you. Made from high-quality white vinyl with a satin finish, it's built to handle the bumps and temperature changes of a laptop or notebook life. The sticker measures approximately 3x4 inches, a size that fits neatly on most laptop lids or notebook covers without overwhelming the space.

Because it's waterproof, scratch resistant, and UV resistant, this sticker can live on a device you take outdoors or use daily. The removable adhesive means you can reposition it during application or remove it cleanly later without leaving residue on your laptop or notebook surface.

What the Sticker's Specs Mean for Your Device

  • "About A Murder" Sticker: Material: high quality white vinyl with a satin finish, 1/8" (3.2mm) white kiss-cut border around the sticker The kiss-cut border makes the sticker easy to peel from its backing and gives a clean, professional edge on your laptop or notebook. The satin finish reduces glare, so the artwork stays readable in different lighting.
    "About A Murder" Sticker
    "About A Murder" Sticker
  • "About A Murder" Sticker: Water, scratch and UV resistant Your laptop or notebook goes into bags, coffee shops, and outdoor spaces. These resistances mean the sticker won't fade in sunlight, peel from moisture, or show scuffs from daily handling.
  • "About A Murder" Sticker: Removable adhesive without residue If you want to change the sticker later or move it to a new device, the adhesive comes off cleanly. This is especially important for laptops where permanent residue can be difficult to remove.

Applying the Sticker to Your Laptop or Notebook

Follow these steps for a smooth, bubble-free application.

  1. Clean the surface: Wipe the area where you'll place the sticker with a microfiber cloth and a small amount of rubbing alcohol or mild soap. Let it dry completely. Oils and dust prevent the adhesive from bonding evenly.
  2. Peel the kiss-cut border: The 3.2mm white border around the sticker is kiss-cut, meaning the vinyl is cut but the backing remains intact. Gently lift one corner of the sticker from the backing. If the sticker curls, press it back down and try peeling from the opposite corner.
  3. Position before pressing: Hold the sticker above your laptop or notebook and lower it into place. Because the adhesive is removable, you can lift and reposition it if the alignment isn't perfect. Take your time here.
  4. Press from center outward: Once positioned, press the sticker down starting from the center and moving toward the edges. This pushes out air bubbles. Use a credit card or similar flat edge wrapped in a soft cloth for even pressure.
  5. Let it set: For best adhesion, follow the supplied product instructions before closing your laptop or placing the notebook in a bag. The adhesive bonds more firmly over time.

Where to Place It for Best Effect

On a laptop, the lid center or lower corner are popular spots. The 3x4 inch size fits well on most laptop lids without covering logos or vents. On a notebook, the front cover or spine area works if the notebook has a smooth, non-textured surface. Avoid placing the sticker over seams, fabric covers, or heavily textured surfaces—the adhesive sticks best to smooth, hard materials.

Removing or Repositioning the Sticker

If you decide to move the sticker to a different device or just want a fresh look, the removable adhesive is designed to come off without residue. Gently warm the sticker with a hairdryer on low heat to soften the adhesive, then peel slowly from one corner. If any residue remains, a dab of rubbing alcohol on a cloth should lift it. The sticker can be reapplied to another clean surface if it hasn't collected dust or lost its stickiness.

A Note About This Made-to-Order Sticker

The 'About A Murder' sticker is made-to-order through a print-on-demand partner and shipped directly to you. This means the sticker you receive may differ slightly in appearance from sticker purchases made at in-person events, but the vinyl quality and durability remain consistent. The print-on-demand process ensures availability even when in-person stock is limited.

Related Articles

Customer Service
Home
Products
Cart
Profile