Back to Blog
Product Reviews 2026-11-18 Holly Bones Art & Design 0 views

"Left Behind" Magnet or Button: Display Ideas That Work

"Left Behind" Magnet or Button: Display Ideas That Work

Pick your backing first, then match the display spot. Practical placement ideas for the "Left Behind" pin-back button and magnet, sized 40x60mm.

Choose the backing before you choose the spot

The "Left Behind" artwork comes as either a pin-back button or a magnet, and that single choice decides where the piece can live. The pin-back option is ideal for securing to fabrics and textiles. The magnet is ideal for refrigerators and other magnetic surfaces. Both versions measure approximately 40x60mm, so the artwork stays small and easy to place.

Start by naming the surface you want to decorate. If it is fabric, order the pin. If it is a fridge or another magnetic surface, order the magnet. That one decision removes most of the guesswork before you hang anything.

What the product record confirms

  • "Left Behind" Magnet or Button: Choose between a pin-back button or a magnet. The backing is the only option, so it determines every display decision that follows.
    "Left Behind" Magnet or Button
    "Left Behind" Magnet or Button
  • "Left Behind" Magnet or Button: The pin-back option is ideal for securing to fabrics and textiles. This narrows pin display to wearable and fabric surfaces rather than walls or metal.
  • "Left Behind" Magnet or Button: The magnet is ideal for refrigerators and other magnetic surfaces. This confirms the magnet's supported use and keeps placement expectations realistic.
  • "Left Behind" Magnet or Button: Measures approximately 40x60mm. The 40x60mm size tells you how much visual space the piece takes up on a bag, jacket or fridge door.

Pin-back display ideas for fabric and textiles

The pin-back button is built for fabrics and textiles. Keep that in mind as you choose a spot, and check that the fabric can take a pin before you fasten it.

  • Jacket or denim collar: A 40x60mm pin sits comfortably on a collar or chest panel. Fasten it through a single layer where possible so the pin does not pull at seams.
  • Canvas tote or messenger bag: Pin the button to the front panel of a fabric bag. The pin-back option is intended for textiles, so a sturdy woven bag is a natural fit.
  • Lanyard or fabric strap: A small pin can sit on a wide fabric strap. Check that the strap is wide enough to hold the 40x60mm piece without twisting.
  • Fabric bulletin board or pin board: If you have a fabric-covered board, the pin-back can hold the button in place as part of a small art grouping.

Magnet display ideas for fridges and magnetic surfaces

The magnet version is intended for refrigerators and other magnetic surfaces. Test that the surface actually holds a magnet before you count on it.

  • Refrigerator door: The most direct use. Place the 40x60mm magnet at eye level or near a corner so it does not get buried under papers.
  • Metal filing cabinet or locker: A steel cabinet or locker door gives the magnet a flat magnetic surface. Keep it away from the door's hinge edge so it does not slide when the door moves.
  • Magnetic memo board: A magnetic board in a kitchen or entryway works if the board holds magnets. Group the button with notes or photos for a small art moment.
  • Metal shelf or tool board: A metal shelf side or magnetic tool board can hold the magnet if the surface is ferrous. Check with a small test magnet first.

A simple placement routine before you commit

Use these checkpoints to avoid ordering the wrong backing or damaging a surface.

  1. Name the surface: Write down whether the target is fabric, a fridge, or another magnetic surface. This decides pin versus magnet.
  2. Check the size in place: Cut a 40x60mm paper rectangle and hold it against the bag, jacket or fridge door. This shows how much space the artwork will occupy.
  3. Test the hold: For the magnet, test the surface with any small magnet you already own. For the pin, check that the fabric can take a pin without pulling.
  4. Place once, then adjust: Fasten the button or magnet in your chosen spot. If the position looks off, move it before daily use sets in.

What the supplied information leaves open

The product record confirms the backing options, the intended surfaces and the approximate 40x60mm size. It does not include care instructions, a maximum fabric weight for the pin, or a stated magnet strength. Treat those as unknowns rather than guarantees. If you need a specific hold for heavy fabric or a thick fridge door, test with a similar object first.

That uncertainty does not make the piece hard to use. It simply means the safest display is the one the record already supports: pin-back on fabrics and textiles, magnet on refrigerators and other magnetic surfaces.

Related Articles

Customer Service
Home
Products
Cart
Profile