Back to Blog
How-to Guides 2026-11-18 Holly Bones Art & Design 0 views

Hanging a "Captive" Print: Size, Placement and Framing

Hanging a "Captive" Print: Size, Placement and Framing

A practical guide to hanging the "Captive" giclée print: choosing between the 8" x 10" bordered edition and the 5" x 7" full-bleed edition, framing each, and picking a spot that suits the gloss paper.

Start with the edition you ordered

The "Captive" print comes in two formats, and the one you have changes the hanging job. The 8" x 10" edition has a white border built for matting and framing, and the edge of the print carries the archival details: title, date of creation, and original medium. The 5" x 7" edition is a compact, borderless full-bleed print. That border difference is the first thing to check before you choose a frame or a wall spot.

Both editions are open edition giclée prints on high-quality archival gloss paper, and each arrives in a protective clear sleeve with a sturdy backer board. Neither edition is signed unless you request it, so if a signature matters to you, sort that out before the print goes on the wall.

What the product record confirms

  • "Captive" Print: Open edition giclée print of "Captive" by Holly Bones, available in 8" x 10" and 5" x 7" sizes. The size you chose determines the frame, mat, and wall space you need.
    "Captive" Print
    "Captive" Print
  • "Captive" Print: The 8" x 10" edition has a white border for easy matting and framing, with title, date, and original medium printed on the edge. That border gives you room to mat the print without covering the archival details.
  • "Captive" Print: The 5" x 7" edition is borderless (full-bleed) and does not include the white border or printed archival details. A full-bleed print needs a frame that holds the paper edge cleanly, and there is no border to trim or mat around.
  • "Captive" Print: Printed on high-quality archival gloss paper and packaged in a clear sleeve with a sturdy backer board. Gloss paper reflects light, which affects where you hang it; the sleeve and backer protect the print until framing.

Framing the 8" x 10" bordered edition

The white border is there to make matting and framing easier, so use it rather than hiding it.

  1. Keep the printed edge visible: The title, date, and medium are printed on the border. If you mat over them, you lose that archival detail. Choose a mat opening that leaves the printed edge showing, or skip the mat and let the border sit inside the frame.
  2. Match the frame to the border: A white or neutral frame lets the border read as part of the artwork. A darker frame creates a stronger outline around the white edge. Either works; decide which effect you want before you buy.
  3. Check the frame depth: The print arrives with a backer board. A standard frame with enough depth to hold the print and backer without bowing the paper is the safe choice. The supplied information does not list a recommended frame depth, so test the fit before you commit.

Framing the 5" x 7" full-bleed edition

With no border, the paper edge becomes the image edge. That changes how the frame should hold it.

  1. Use a frame sized for the full sheet: A 5" x 7" frame that holds the paper edge without overlapping the image is the cleanest option. If the frame opening is slightly smaller than the paper, it will crop the print.
  2. Skip the mat or use a float mount: A traditional mat would cover part of the image on a borderless print. If you want breathing room around the art, a float mount that shows the entire sheet is the better approach. The supplied information does not include mounting instructions, so ask a framer if you are unsure.
  3. Handle the gloss surface carefully: Gloss paper shows fingerprints and smudges. Hold the print by the edges and keep the sleeve and backer board until the frame is ready.

Placement tips for a gloss print

Gloss paper reflects light, so placement is as much about controlling glare as it is about wall space.

  • Avoid direct sunlight: Strong sun on gloss paper creates glare that can wash out the image. A wall that receives indirect light is easier on the eyes and on the print.
  • Watch overhead and lamp light: A ceiling fixture or table lamp aimed at the print will show as a bright spot on the gloss surface. Angle the light or move the print so the reflection falls away from your viewing position.
  • Match the spot to the size: The 8" x 10" edition holds a small wall or a shelf back; the 5" x 7" edition suits tighter spaces such as a desk nook or a gallery cluster. Neither size needs a large wall, so choose the spot that gives the print room to be seen without crowding.

Building a small wall layout

If you are hanging "Captive" alongside other prints, start with the largest piece and work outward. The 8" x 10" bordered edition can anchor a small group; the 5" x 7" full-bleed edition works as a companion piece. Keep the gap between frames consistent, and lay the arrangement on the floor before you put any nails in the wall.

The supplied information does not include hanging hardware or a recommended hanging height, so use the hardware that comes with your frame and a level you trust. If you are renting or want to avoid wall damage, removable adhesive strips are an option, but check the weight limit on the strip against your framed print.

What to check before the print goes up

Before you commit to a spot, hold the framed print against the wall at eye level and step back. Check for glare from windows and lamps, confirm the frame sits flat, and make sure the printed edge on the 8" x 10" edition is still visible if you matted it. If you ordered the 5" x 7" edition, confirm the frame is not cropping the image.

The product record does not specify UV protection, glass type, or a recommended hanging height, so those choices are yours. What it does confirm is the paper, the border difference between the two editions, and the packaging that protects the print until it is framed. Work from those facts, and the hanging job stays simple.

Related Articles

Customer Service
Home
Products
Cart
Profile